Concrete Pharmacy® FIBER — MSDS
October 2007
Concrete Pharmacy® FIBER - MSDS [Printable PDF]SECTION I — GENERAL INFORMATION
1. CTS Cement Manufacturing Corporation | Rapid Set® Products
11065 Knott Avenue, Suite A
Cypress, CA 90630
2. Emergency Phone Number: (800) 929-3030
3. Website: www.ctscement.com
4. Chemical Name and Synonyms: N/A
5. Trade Name and Synonyms: Fiber
6. Class: Additive
SECTION II — PHYSICAL DATA
7. Boiling Range: N/A
8. Melting Point: 300°F, 149°C
9. Vapor Pressure: N/A
10. Vapor Density: N/A
11. Specific Gravity: 0.90 (water = 1)
12. H2O Soluble: Insoluble
13. Evaporation Rate: N/A
14. Appearance and Odor: Short clear fibers with no apparent odor
SECTION III — FIRE AND EXPLOSION HAZARD DATA
15. Flash Point: (Method Used) N/A
16. Explosive Limits: N/A
17. Extinguishing Media: Water spray, dry chemical foam CO2, or Halon
18. Special Fire-Fighting Procedures: Wear NIOSH/MSHA-approved for class A fires.
19. Unusual Fire and Explosion Hazards: Hazardous products of combustion: resulting combustion products will vary from fire to fire, depending on factors such as temperature, air supply and other materials present.
SECTION IV — HEALTH HAZARD DATA
20. Effects of Overexposure:
- Eyes — No
- Skin — No
- Inhalation — No
- Ingestion — No
SECTION V — EMERGENCY AND FIRST-AID PROCEDURES
22. Eyes: Immediately flush with potable water for a minimum of 15 minutes. Seek medical attention.
23. Skin: Flush with copius amounts of water.
24. Inhalation: Remove to fresh air. Seek medical attention.